Adjustable Pressure Switch is a mechanical diaphragm pressure switch. Use stainless steel pressure diaphragm.
Adjustable Pressure Switch is mainly suitable for neutral gases such as air, gas, water vapor and liquid media such as water, refrigerant, oil, etc., and can be used in vacuum. Can be used for air compressors, water pumps, etc.
Sino-Inst offers a variety of Pressure Switches for pressure control. If you have any questions, please contact our sales engineers.
Specifications of Adjustable Pressure Switch PC-400
| Pressure regulation range: | -1～145PSI |
| Action pressure: | -0.5～80PSI |
| Working pressure deviation: | ± 3～30PSI |
| Ambient temperature: | -40～85℃， |
| Medium temperature: | -40～125℃ |
| Load power supply: | 220VAC ,56/60Hz，6A |
| Working life: | ≥100,000 Cycles |
If users have special requirements, they can be customized according to the provided samples, drawings, technical parameters, etc.
PC400 series adjustable stainless steel pressure switch model table
| Model | Thread size and length (mm) | Dimensions (mm) | Electrical connections | Switch Type Normally closed (A)/normally open B /C (normally open + normally closed) | Adjustment range (PSI) | Action pressure (PSI) |
| PC 401 | M12 x1.5/10 | Φ24×46 | Terminals | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 402 | M12 x1.5/10 | Φ24×55 | Direct out | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 403 | M12 x1.5/10 | Φ24×46 | Terminals | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 404 | M12 x1.5/10 | Φ24×55 | Direct out | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 405 | G1/4-19/13 | Φ24×49 | Direct out | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 406 | G1/4-19/13 | Φ24×58 | Direct out | Single pole single throw A/B | -1～30 | -0.5～15 |
| PC 407 | G1/4-19/13 | Φ24×49 | Terminals | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 408 | G1/4-19/13 | Φ24×58 | Direct out | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 409 | 1/4-18NPT/13 | Φ24×49 | Terminals | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 410 | 1/4-18NPT/13 | Φ24×58 | Direct out | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 411 | 1/4-18NPT/13 | Φ24×49 | Terminals | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 412 | 1/4-18NPT/13 | Φ24×58 | Direct out | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 413 | G1/2-14/15 | Φ24×51 | Terminals | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 414 | G1/2-14/15 | Φ24×60 | Direct out | Single pole single throw A/B | -1～145 | -0.5～80 |
| PC 415 | G1/2-14/15 | Φ24×51 | Terminals | Single Pole Double Throw C | -1～145 | -0.5～80 |
| PC 416 | G1/2-14/15 | Φ24×60 | Direct out | Single Pole Double Throw C | -1～145 | -0.5～80 |
Adjustable pressure switch for air compressor
The air compressor pressure switch can adjust the start and stop of the air compressor. Through the pressure adjustment in the air tank, let the air compressor rest and maintain it.
When the air compressor factory is debugging, it can be adjusted to a certain pressure according to the needs of different customers, and then set a good difference.
For example, when the compressor starts, pump air into it, and when the pressure reaches 20 kg, the air compressor is unloaded or stopped.
When the pressure is 14 kg, the air compressor starts again, but it will have a pressure difference, so you can let it rest at this time.
Extended reading: Miniature Pressure Switch
How to adjust the air compressor pressure switch?
Pressure level adjustment. Use pressure to adjust the screw clockwise to increase its pressure. On the contrary, the acting pressure is low, indicating that its pressure difference remains unchanged.
Use pressure to adjust the screw in 1 clockwise, so that it will rise under its action. On the contrary, the acting pressure decreases, indicating that its pressure will not change.
When the air compressor is set to pressure or running, it means that the vent valve is saturated, and the valve will discharge the gas in the steel pipe. Of course, this is a normal phenomenon and you don’t need to worry.
When adjusting the pressure, do not exceed the pressure range of the compressor, but proper exhaust is necessary.
Besides pressure sensors, we also supply torque sensors. What Is a Torque Transducer? How to Choose?
Adjustable pressure switch for water pump
The working principle of the water pump pressure controller:
The working medium (oil, gas, and water) directly acts on the metal diaphragm. The deformation of the metal diaphragm reflects the pressure of the working medium. Simultaneously output detection signals or control signals.
Extension of knowledge points:
The water pump pressure controller is generally a metal 316L diaphragm sensor, which can be used for neutral oil, gaseous media and water.
The setting value of the controller is adjustable, and the range of adjustment range -0.1~40MPa is optional.
Adjustment method of water pump pressure controller:
- Adjust the pressure limit to 1.5MPa (upper switching value) and send out a contact signal. The operation steps:
- Open the cover and loosen the locker.
- Turn the setting value adjustment screw clockwise to make the setting value change from large to small until the switch contacts switch at 1.5MPa.
- Tighten the locker.
- Adjust the lower limit of pressure to 0.5MPa (lower switching value) to send out a contact signal, the operation steps:
- Open the cover and loosen the locker.
- Rotate the setting value adjustment screw counterclockwise to make the setting value change from small to large until the switch contacts switch at 0.5MPa.
- Tighten the locker.
More Featured Pressure Switches
You may like:
- 工业气体压力传感器和变送器 – 气体压力测量
- 压力传感器应用——特色行业应用
- 水压传感器用于测量水压
- 船舶压载舱压力-液位测量
- 静压传感器和变送器的特性及应用
- 压力的类型：绝对压力、表压、密封表压和差压
- 天然气管道监测：压力-温度-流量
- 什么是齐平式隔膜压力传感器？何时使用？
- 检查清单：4-20mA压力变送器常见故障和错误
- 细节差异：压力变送器与压力表
- 压力传感器和压力开关有什么区别？
Sino-Inst offers over 50 Adjustable Pressure Switches for pressure measurement. About 50% of these are liquid pressure swithces, 40% is gas pressure switches.
A wide variety of Adjustable Pressure Switches options are available to you, such as free samples, paid samples.
Sino-Inst is a globally recognized supplier and manufacturer of Adjustable Pressure Switch instrumentation, located in China.
吴鹏出生于1980年，是一位备受尊敬且成就卓著的男性工程师，在自动化领域拥有丰富的经验。凭借20多年的行业经验，吴鹏在学术和工程领域都做出了卓越的贡献。
在其职业生涯中，吴鹏参与了许多国内外工程项目。他最著名的项目包括炼油厂智能控制系统的开发、石化厂尖端分布式控制系统的设计以及天然气管道控制算法的优化。
Adjustable pressure switch for Sale | Stainless steel pressure switch-Sino-Inst
Adjustable Pressure Switch is a mechanical diaphragm pressure switch. Use stainless steel pressure diaphragm.
Product SKU: Adjustable Pressure Switch PC-400
Product Brand: Sino-Inst
Product Currency: USD
Product Price: 30
Price Valid Until: 2059-09-30
Product In-Stock: InStock
5