Micro flow meters for low flow liquids

Micro motion flow meter

Micro Motion Coriolis Flow Meter is a flow meter made according to the Coriolis acceleration theory. Z-Series Straight Tube Micro Motion Coriolis Flow Meter simultaneously measures mass flow, density, temperature and viscosity.

How does micro motion flow meter work?

The micro-motion mass flowmeter is a flowmeter made according to the Coriolis acceleration theory. There is a straight tube that rotates in a plane around a fixed axis O at an angular velocity w, and a particle in the tube moves outwards along the straight tube at a speed v. Because The mass point m is in a system with both rotational motion and linear motion, so it will obtain two accelerations.

Serving size:

① Centripetal acceleration a, its value is rw^2 (r is the distance from the particle m to the axis O), and the direction points to the axis O.
② Tangential acceleration ac, its value is 2uw. The direction is perpendicular to a, it comes from the rotating pipe. At the same time it produces a reaction force to the pipe. This reaction force is the Coriolis force. Its calculation formula is:

F=2muw —————-(3-8)

Where:
F is Coriolis force, N;
w is the angular velocity, 1/s;
u is the radial velocity in the rotating system, m/s,
m is the mass of the moving object, kg.

If the density of the fluid is p, the tangential Coriolis force on any section of pipe △x is:

△F=2pA△xuw ———(3~9)

Where:
A is the cross-sectional area of ​​the pipe.

In the formula (3-9), pAu is the natural flow rate of the fluid, set as QM’, then the formula (3-9) can be expressed as:

△F= 2w△xQm————-(3-10)

From the above equation, we can know the mass flow Qm as long as the Coriolis force △F is measured. This is the measuring principle of micro-motion mass flowmeter.

Extended reading: U-series Liquid Mass Flow Meter | Liquid-slurry flow measure